Uwharrie Wheeling Trip - Sept. 21-23

[Hans3T]

I might tag along with Perk if I do not have to work.

Sent with Tapacrack

 

[telemike]

What tire pressures do you usually run at URE? If I remember, with the loose rocks and type of soil, you don't really need to go down a lot?

 

[ReconH3]

Depends if you have bead locks or not. Are the sidewall on your tire soft or hard. I have bead locks with very tough tires and run down to 7psi. It's not only for deformation but to stop tire bounce.

 

[telemike]

No bead locks. Softer sidewalls.

Sent from my A500 using Tapatalk 2

 

[ReconH3]

I would stick at around 20 psi. Below that you could risk unseating a bead

 

[cgalpha08]

Yep, i was at 18 when this happened

I usually stick around 23-25 unless i have to go lower.

Sent from my DROID BIONIC using Tapatalk 2

 

[Hans3T]

Looks like I'll be heading out with Perk. We're going to be truck-pooling in his H1. I just want to enjoy the trail ride and snap pictures this time around. :cheers:

 

[rebell_h3]

I have 35's with the 2in lift no UCP is that going to get me around without tearing it up

 

[telemike]

I have 35's with the 2in lift no UCP is that going to get me around without tearing it up

You can do all the trails there with that setup. I used to all the trails years ago with an '89 4Runner, 2" lift and 33 x 12.50's. You need to watch for sharp rocks, and the off-camber on Daniel.

 

[Hans3T]

:agree:

You'll be just fine, rebell.

 

[Hans3T]

Hans your T looks great, nice pics!

Thanks kindly! It's a lot of fun to see the transformation that's been happening since day one. ...and I'm not done yet! :wink:

 

[rebell_h3]

thanks for the info. i'm ready to go i hope to c you guys there