RD Frame Plate Support install instructions

[theBroken]

To purchase click on the link below
http://www.rdoffroad.com/index.php?option=com_content&view=article&id=22&Itemid=52

 

[M22KLARS]

Oh sweet! Someone was just asking about these.

 

[ReconH3]

Here's mine installed. I installed mine upside down because otherwise I can't remove my winch plate. Thanks for making a great product.


"Ex Umbris Venimus"

Sent from my iPhone

 

[f5moab]

If you are going to install the CBPhoto winch mount (another highly recommended item), these are, in my opinion, a necessity. If you have to be yanked out via your D-ring and the yanking vehicle is at an angle (up a hill and you are on flat ground, or the vehicle is on the top and pulling you up a hill, etc) these are a necessity. The factory GM plates that the D-rings attach to are designed for a straight pull or yank and anything on an angle could (probably will) bend the factory plates and then your bumper will be on an angle until the plates are hammered back into place.

Here's some more photos of the plates attached....

 

[MUTAINT]

We have them on both HUMMERs and I have never worried about yanking, winching another rig or being yanked or winched with these welded on regardless of the angle!