H3Hummer
Well-Known Member
- Messages
- 700
- Location
- LUXEMBOURG in EU
Hmmm, for me, i prefer without.....
-
Welcome to H4O! For a reduced ad experience, please login or register with the forum.
Project Angry Orange
- Thread starter Real4WD
- Start date
Real4WD
Well-Known Member
- Messages
- 355
- Location
- Wherever the Army Sends Me
20240830
Installed new Outfitter Design front driveshaft. The OEM unit's CV joint failed.
Installed new Outfitter Design front driveshaft. The OEM unit's CV joint failed.
H3Hummer
Well-Known Member
- Messages
- 700
- Location
- LUXEMBOURG in EU
wow, verrrrrrrry interesting, where to get this drive shafts?Are those Dana Ujoints in there ?
Real4WD
Well-Known Member
- Messages
- 355
- Location
- Wherever the Army Sends Me
I bought it from Outfitter Design's website. Unsure of the brand of U-Joint
H3Hummer
Well-Known Member
- Messages
- 700
- Location
- LUXEMBOURG in EU
Do you have the web adresse and a part number maybe?
H3Hummer
Well-Known Member
- Messages
- 700
- Location
- LUXEMBOURG in EU
Any vibrations when driving ?
Real4WD
Well-Known Member
- Messages
- 355
- Location
- Wherever the Army Sends Me
The truck doesn't vibrate any more than it did before the swap.
Real4WD
Well-Known Member
- Messages
- 355
- Location
- Wherever the Army Sends Me
20260530
Replaced some interior parts with units in better condition. For the combo pics, the old panel is on the left..new on the right.
-Rear Seat 40 Split Back Panel (Upper) (GM#JC-596802-5979)
-Rear Seat 40 Split Back Panel (Lower) (GM#JC-603378-5978)
-Rear Seat 60 Split Back Panel (Upper) (GM#JC-603396-5980)
-Rear Seat Mount Center Strip Cover (GM#JC-600637-5981)
-Rear Door Jack Cover (GM#AFH-79377-B-5840)
Replaced some interior parts with units in better condition. For the combo pics, the old panel is on the left..new on the right.
-Rear Seat 40 Split Back Panel (Upper) (GM#JC-596802-5979)
-Rear Seat 40 Split Back Panel (Lower) (GM#JC-603378-5978)
-Rear Seat 60 Split Back Panel (Upper) (GM#JC-603396-5980)
-Rear Seat Mount Center Strip Cover (GM#JC-600637-5981)
-Rear Door Jack Cover (GM#AFH-79377-B-5840)
Last edited:
Real4WD
Well-Known Member
- Messages
- 355
- Location
- Wherever the Army Sends Me
20260614
-Replaced the glove box (and transferred internals) with a nicer unit. (GM#21997795).
-Transferring the RPO code decal was a trick. At first when I tried to peel it off, the sticker started to fall apart. I had to resort to science to remove it without damage. Turns out, if you bake your glove box in the oven for 10 minutes at 250 degrees, it heats up the decal adhesive enough to release from the panel. Throw some new spray adhesive on, and viola! All the decals were transferred without damage for a "numbers matching" unit.
-Replaced the glove box (and transferred internals) with a nicer unit. (GM#21997795).
-Transferring the RPO code decal was a trick. At first when I tried to peel it off, the sticker started to fall apart. I had to resort to science to remove it without damage. Turns out, if you bake your glove box in the oven for 10 minutes at 250 degrees, it heats up the decal adhesive enough to release from the panel. Throw some new spray adhesive on, and viola! All the decals were transferred without damage for a "numbers matching" unit.