Neo
Badfish
- Messages
- 1,669
- Location
- Brookings, OR
i need the flat sided factory protection that i can mount the bullet tubes that i have to ... thanks
-
Welcome to H4O! For a reduced ad experience, please login or register with the forum.
-
The Swap Meet is not a regulated market, and buyers/sellers are not screened. Please do your homework before agreeing to anyone for any purchases or sales. If you have any questions about the user, please contact @Alrock via private message and I will attempt to provide any relevant information about the person, including location based on IP address. This is not a guarantee or promise of delivery but the addtional information may be helpful to you in your transaction. There are no guarantees here so use your judgement. Consider payment options like PayPal that have recourse (only when treated as a sale, and not as % between friends). Scammers will often use Zelle or ask for PayPal between friends because you cannot reclaim the money in the event of fraud or non-delivery. If a user has just joined and/or has few posts they should be viewed very cautiously.
Need H1 Rocker Protection
- Thread starter Neo
- Start date
- Messages
- 10,533
- Location
- Central Texas
Neo, I will look around in SoCal and see what I can find. Guess you never got Rich's spare set?
Neo
Badfish
- Messages
- 1,669
- Location
- Brookings, OR
i hate it when people die on me ... yep i think i missed out on that set ... RIP Rich
- Messages
- 10,533
- Location
- Central Texas
Didn't know Rich but he must have been a great guy, heard nothing but good things about him.
- Messages
- 10,533
- Location
- Central Texas
Www.humvee.net. Not sure what Dan will need for these but I think the last ones went for $1,600.00 a pair. I have had three sets of Dan's and one of Rob's. A great investment if you are a serious wheeler. Every member in the H1 Psycho Squad has them on their trucks.
HUMMER INVESTMENTS
[o O IIIIIIII O o]
- Messages
- 3,518
- Location
- Black Hawk, SD
I am still looking hard for HummerDans pair. Have had numerous accounts though where i had to have normal protection in order to not fall over the edge of a cliff
Not sure if this is helpful, Neo, but seems like a good deal...
http://cgi.ebay.com/ebaymotors/HUMM..._Accessories&hash=item484159959f#ht_500wt_956
http://cgi.ebay.com/ebaymotors/HUMM..._Accessories&hash=item484159959f#ht_500wt_956
HUMMER INVESTMENTS
[o O IIIIIIII O o]
- Messages
- 3,518
- Location
- Black Hawk, SD
He needs rocker protection:
You know those things on the side of the H1 where you see a long rectangle just below the doors and between the wheels. Kinda like you have on your H3 but it is a flat piece of steel. Ill try to post a picture. But it does look like a good deal of what i dont need:wink:
Neo
Badfish
- Messages
- 1,669
- Location
- Brookings, OR
that is the ucp , i have all of that , i need the rocker and floor protection pieces like HII said . but thanks for thinking of me :wink:
ajk150
Well-Known Member
- Messages
- 196
- Location
- Haverford, PA
damn, i wish i was home. That's actually a good price and not a far drive. And it looks way better then what i have on mine right now. But its so cheap, i wouldn't do it unless in person, to avoid getting scammed. :sigh:
- Messages
- 10,533
- Location
- Central Texas
With his user rating I think you are ok. Eric Hemminger sells those sets also.
Neo
Badfish
- Messages
- 1,669
- Location
- Brookings, OR
it looks like i may be getting Laguna's RPP since he is upgrading , now i need to find the mounting hardware that goes with it . if someone has a pic of what all is needed maybe we can fab something up if i can't find the actual mounting parts ...
Ron B
Well-Known Member
- Messages
- 359
- Location
- Los Angeles
I am upgrading to Hummer Dan's as well -- I will have a set of Unlimited Offroad steel rockers (the original design from 8/9 yrs ago) fs in a bit. I haven't posted them yet because I don't know when I can pick up the new set. Obviously used but they held up really well -- needs a powder coat to look sexy. A local friend might be interested, but if he is not...
- Messages
- 10,533
- Location
- Central Texas
Neo, hummech can give you a list of everything you need. Is your tub pre-drilled in the fronr and rear wheel wells? Post up a picture of the underside of your tub. That will make it easier to see what all you need.
Neo
Badfish
- Messages
- 1,669
- Location
- Brookings, OR
i dont think anything is pre drilled ...
- Messages
- 10,533
- Location
- Central Texas
Maybe Mike can chime in and tell you what you may need. Might PM him the pictures.
icentropy
Active Member
- Messages
- 42
- Location
- Chesaw, WA
Unless i missed it, I didn't see if you were looking for a factory flat set (aluminum or steel) or an aftermarket set to stick out further and protect the doors?
I was thinking of selling my factory aluminum RPP to upgrade to the steel aftermarket ones, I just can't decide if i should pay money to add 200lbs of weight to my truck...
I think there's gonna be a handful of guys with aluminum RPPs that are going to want to sell them as soon as HummerDan ships his run out. I know there a few guys in Australia that are looking around to buy some of the aluminum RPPs as well as they've already made me an offer so the RPP market is getting busy :-D
Is there a specific style you were looking for? and what are the tube's you were refering to? You're not talking about the old factory nerf step tubes are you? I still have those brackets mounted to my RPP, I bent and threw away the tubes years ago and never got around to removing the brackets from under my truck. Been too busy, then lazy, then busy.
I was thinking of selling my factory aluminum RPP to upgrade to the steel aftermarket ones, I just can't decide if i should pay money to add 200lbs of weight to my truck...
I think there's gonna be a handful of guys with aluminum RPPs that are going to want to sell them as soon as HummerDan ships his run out. I know there a few guys in Australia that are looking around to buy some of the aluminum RPPs as well as they've already made me an offer so the RPP market is getting busy :-D
Is there a specific style you were looking for? and what are the tube's you were refering to? You're not talking about the old factory nerf step tubes are you? I still have those brackets mounted to my RPP, I bent and threw away the tubes years ago and never got around to removing the brackets from under my truck. Been too busy, then lazy, then busy.
- Messages
- 10,533
- Location
- Central Texas
Neo has a set of the factory aluminum RPP on the way. He is seeing what he needs in the way of J-clips, fasteners and such to install them on a truck that has never had them.