Harness I will be installing for multi light and electronics connections.

[Renagade132]

I will be using a MN Star harness in my H2 for emergency lights, flood lighting, spot lighting, additional electronics connections such as inverter for lap top, cell phone, CB radio, Scanner, control box for remote head of emergency lighting, and anything else that might come up. The harness has multiple uses, so it will allow me to add on as future ideas come into play. I will be using a fuse and relay unit that works perfect with this harness that has a main manual breaker, which allows me to shut everthing down from it or of course if a massive surge comes through, it will trip this breaker before causing any damage to the components (this fuse panel will go in the engine compartment) I will add pics as progress begins, the cold weather and snow is delaying everything, of course!

 

[Renagade132]

Only a partial pic of the Harness.

 

[Renagade132]

Schematics for the Harness.

 

[Renagade132]

Sorry that the schematics pic posted upside down!

 

[Renagade132]

Still haven't been able to put this in because it's been so damn cold!!!

 

[alrock]

It's been in the 70s all week :mock:

 

[jakesz28]

It's been in the 70s all week :mock:

I have three foot of snow down the sides of the driveway and it is to cold to do any work. It's only 1* F outside right now. Do you have a spot I can park my camper? LOL.

 

[Bigunit]

I do.Come on down to Tucson.

Sent from my XT1080 using Tapataint

 

[Renagade132]

If I could bring all my tools with me, would drive out somewhere where it's warm and do some work on my truck! lol

 

[Bigunit]

Like U offered, come on down to Tucson and I'll help you wrench too.

Sent from my XT1080 using Tapataint