• Welcome to H4O! For a reduced ad experience, please login or register with the forum.

New Hummer Owner

Paladine71

ΜΟΛΩΝ ΛΑΒΕ
Messages
1,483
Location
Tallmansville, WV
The Smittybilt covers are not a perfect fit for the H3, they are made for Jeeps. The front seat covers can be secured by tying them into place, mine don't slide at all. To completely cover the rear seats, you'll need one of the front seat covers and one of the rear ones. The rear cover will need a little trimming to fit the head rest of the H3, but it's not too bad. It also does not come down completely to the base of the seat, lacks about 3 inches, but isn't too noticable. The seats still fold forward without an issue. I'm not sure how you'd secure the overhead console, I don't have one. I did have the tailgate cover, but the fit isn't good, and again no way to secure it without drilling. I ended up not using it.

I was the Commander of a security company (QRF and ECP) while assigned to the 1st Armored Division back in 2008 near Tikrit. We had a "disagreement" with some jihadists while I was out on patrol in Tikrit. We came home, they didn't.

OnStar can unlock your door remotely, if you get locked out. It just takes a phone call to them.
 

snoman48

Active Member
Messages
44
Location
Poughkeepsie, NY
Hey 08SolarFlareH3 I head up to the Finger Lakes when I can on weekends! We have a small house on the bluff on Keuka Lake. Love it up there, it's like a redneck heaven; ride offroad, drink, and shoot!

Paladine, thanks for the G2 on the seat covers. I was gonna try and pull the headliner, I think there's an overhead beam that I'd drill holes into and probably rivet some fasteners for the OHC. Still waiting on word back from Smittybilt on dimensions. That sucks to hear about the tailgate cover, I might chance it and try to make it work. I don't mind drilling if the fit's good enough. Thanks again for your service, I attached to a QRF unit and had a blast with them. I also did some ERT (emergency reclamation team) work for downed helo's, some of my best times there too. About Onstar, do you have to have a subscription with them to get them to unlock the doors? Or will they just do it for you?

CBetts
I love driving the H3 in stick! The tranny reminds me of a Wrangler we had that was stick, lotta fun. It's not the light override, as my front dome light works just fine. Maybe that rattling is coming from the rear door latch, I'll see if I can find a service bulletin on it somewhere for a fix.
 

snoman48

Active Member
Messages
44
Location
Poughkeepsie, NY
Quick lighting question for you guys, my H3 came with what I believe is the stock bull bar, though it looks like a Westin. It doesn't have any lights mounted in it currently, and I was wondering if the circuit for the stock fog lamps would support two PIAA lamps or something along those lines. The only downside I can think of currently would be they'd kick off when I go to Hi-Beams, but I'm guessing there's an "all-on-high" mod somewhere to prevent that? I know when I had my Avalanche the guys over on that forum had the science down.
 

SkinGripz

Well-Known Member
Messages
276
Location
Horse Country, Texas
Welcome ! And thank you for your service !!

common problem is rear door latches rattle. Dealer replaced in wifes H3 but still rattled. I pumped a pound of grease in them, and they rattle softer now...

made a point twenty something years ago, when I locked the keys in the MWR van at the side of the highway, and ended up having to break the window, to never leave keys in a vehicle before putting drivers window down 1/3 way. Cant count the times it has saved my ass.

dome light- (rear hatch?) it's the switch in the rear door frame. A little push button job, replaced mine first week. Ebay $5.00. Worked ever sence.
 

snoman48

Active Member
Messages
44
Location
Poughkeepsie, NY
Welcome ! And thank you for your service !!

common problem is rear door latches rattle. Dealer replaced in wifes H3 but still rattled. I pumped a pound of grease in them, and they rattle softer now...

made a point twenty something years ago, when I locked the keys in the MWR van at the side of the highway, and ended up having to break the window, to never leave keys in a vehicle before putting drivers window down 1/3 way. Cant count the times it has saved my ass.

dome light- (rear hatch?) it's the switch in the rear door frame. A little push button job, replaced mine first week. Ebay $5.00. Worked ever sence.

Good suggestion! But can that door switch override the interior lights dial that you turn all the way up and it kicks on the dome lights? (instrument panel brightness thumbwheel thingy) It's worth a shot though, I'll investigate that whenever I have a day off..sometime..never.
 

SkinGripz

Well-Known Member
Messages
276
Location
Horse Country, Texas
See your point as well, and dont know.

Try this: put your dash knob where the light should be on,
open the hatch door and screw with the switch. See if any
effect.

On mine, i would open the door, no light would come in for about 15 seconds, then it would.
I thumped it a few times and it would go on and off with the thumping. Pulled switch, shorted leads with
paper clip and came on, deduced bad switch. Replaced 2 years ago and has worked fine since.

in the grand scheme of all things though, most guys would kill for a Hummer with a broken dome light !!!
 

snoman48

Active Member
Messages
44
Location
Poughkeepsie, NY
Ha, I like my dome lights, once they work I'll put in some brighter LED's and probably do the third dome light up front mod. I'll definitely give that a shot next chance I get, thanks again!
 
Top