H3T Bed Rail Question

[PbSlinger]

Sorry if this has been answered, but nothing came up on the search function here.
Been looking at the Rago Industries site and their gear mount systems, where the rails are used with a threaded insert in the rail and a mounting plate is attached to it. Question is are our bed rail slots the same as the Tacomas or Tundras? Looking at the threaded mounts that slide into the rails and wondering if ours are compatible.
Or do I need to fab something to fit?

 

[Alpha X]

You can use these spring nuts. They will slide into the H3T rails. I have a bed cover mounted using these.
I got them at Home Depot.

ZA1003-8EG-10

Superstrut 3/8 in. Strut Channel Spring Nut (5-Pack) ZA1003/8EG-10 - The Home Depot

The self-aligning 3/8 in. Channel Spring Nuts (5-Pack) are designed to provide resistance to pull-out and side slip in excess of the full strength of the channels with which they are used. These nuts offer a silver electroplated finish and are designed for use with A and C series channels and...

www.homedepot.com

 

[PbSlinger]

I'll try those. Thanks.