Search results

They weld the holes up and redrill. If i recall 1-2 holes line up or are close. The other option is new hubs like the ones solid sells or you could use 8 lug hubs on the front axle to match a 14bolt rear. Downside is you"ll need new rims.

I think we have one from a 2006. If it will work for you I’ll be able to look for it later today if your interested

Not sure what your online ordering options are but there are some cheap ones on ebay that would be perfect for what you want to do good luck

Your on the right track! Tip to save a few bucks. go to the local self serve auto wrecker and pick up some front shafts off any chevy 1500-3500 chevy truck,suburban or tahoe. Grab the nuts and and washers or buy the cheapest one you can at your favorite parts store. You'll need to pull the axles...

I’m with Doc on this one.It’s a common issue I’ve repaired several Ls motor exhaust leaks including the aluminum 5.3 that you have. Never came across one that would not seal!! I highly recommend that you buy ARP bolts for the replacement. Last time they will ever break. This is the part number...

SOLD!!!

Bebe has a Complete rotor to rotor sprung over rear end with an ARB for sale. She may part it out No compressor

Price drop 325.00 shipped in the lower 48

Bun trail welder!! New in the box never used. 24volt flux core welder. 350.00 offer plus shipping

When we built Bebe’s tube doors the rear fender was part of the design

Have you split the fuse box? Some have had issues with corrosion.

The wires are there. Not plug and play.You’ll have to cut the plug off the controller pig tail and splice them together . Right above your foot when it’s on the gas pedal there’s a light above your shin. They are tucked up in that area. Same on our 2006 H3 as was the 2009 H3t.

SOLD Started its long journey to Nova Scotia Canada today.