JPaul
Well-Known Member
- Messages
- 2,402
- Location
- Way up north, UT
I was able to finish up my heated mirror install on my H3 and thought I would share exactly how I did that with everyone, since GM didn't seem to think that heated mirrors on a luxury vehicle was necessary. The cost of doing this mod is pretty low, but it is super time intensive (I think it took me about 12-15 hours). You might be able to do it quicker since you'd have exactly how to do it in front of you, where I only mostly had that.
I have to give credit to Travis Peters for putting a how to up on his Facebook page, although it was a bit incomplete and gave no indication of how to get the wiring from the door into the engine bay. Still, his work was very helpful and can be seen here (Facebook account needed I think): https://www.facebook.com/travis.pet...14342820.148444.594622820&type=1&l=30e13ecf89
I would also like to thank those that gave me ideas and input for some of the other areas like wiring to the engine bay.
I will be breaking this install up into several posts due to the massive amount of pictures I took (101 photos and a video).
I have to give credit to Travis Peters for putting a how to up on his Facebook page, although it was a bit incomplete and gave no indication of how to get the wiring from the door into the engine bay. Still, his work was very helpful and can be seen here (Facebook account needed I think): https://www.facebook.com/travis.pet...14342820.148444.594622820&type=1&l=30e13ecf89
I would also like to thank those that gave me ideas and input for some of the other areas like wiring to the engine bay.
I will be breaking this install up into several posts due to the massive amount of pictures I took (101 photos and a video).
Last edited: