Search results

I had my 4L60-E trans completely rebuilt for less than $1,700. I'd check around.

Great looking rig, Welcome from NE MS.

Welcome aboard from Corinth MS

Welcome from another 06 H3 owner who has basically rebuilt the entire truck.

Understood. From what I recall, GM changed the computers in '08. After that they were V8 compatible. The '06 needed the original PCM to talk to the '06 BCM for the truck interior components (this is another discussion entirely if you want the odometer to keep working.)

If doing a V8 swap in an '06, be sure to check your computer compatibility. I ran into issues when researching it for my rig, and didn't want to run 2 computers. I hear that it's possible I. The '06, but for me no shops locally could/would tackle it.

Check out the valve cover/PCV condition. This got clogged up in my 2006/I5 and cost me my original engine and complicated my engine rebuild. Didn't realize it until after the fact.

You beat me x2.

I've gotten 'GUNPOWDER' back in the woods on a couple of recent trips. NE Texas for work/play & a Fall foliage trip with the Mrs. to Hot Springs Nat'l Park/Ouachita Mountains. Ventured along the 'Winona Scenic Route' through the mountains. A very rocky, but fun drive on ridges & shelf roads, and...

Looks like a great ride.

The Adapters I got off of Etsy. 4H3Stuff (3439546378) They have been on for 1 yr with no issues.

I used SUPAREE. Relatively straight forward installation & came with everything but the polarity inverters. ACER 4LO has some really good 'How To' videos on the process.

Hey, just came across this. Don't know anything else about it but maybe it can help. https://pin.it/4tAHspEyF

I'm about to RAPTOR part of my rig. Was advised by a professional paint/body man to use the larger kit that comes with its own spray gun vs the individual rattle cans. You'll get much better results. Set pressure between 30-50psi. The further back you spray from, the finer the texture will be.

The rig is nice, but I LOVE the tag!

Beautiful rig. Why are you selling it?

Welcome aboard! I think that many of us are turning the same page with the upkeep and repairs. Doing the best we can with what we can find. I've lucked up on a young man who has opened a mechanics shop near the house. I've got his number on speed dial. Keeping these rigs in good shape is...

Agreed, so glad it was in town, and not in the middle of nowhere or at highway speeds. And that the hub stayed inside the wheel and it didn't go bounding into oncoming traffic.

Recently had a bad surprise while pulling a loaded trailer. The rear drivers wheel decided that it was not wanting to play along anymore. Fortunately, I was about to stop for gas and was able to coast onto a level concrete surface, under cover and lighted. Patience was tested, but GOD looks out...

I've replaced mine with a Power Acoustik 10.2" touchscreen and will give it mixed reviews. When I originally installed it, everything worked fine, but I didn't have my frt/rr cameras installed. I installed the cameras several months later and the plugs in the back of the unit didn't have enough...