WTS OEM UCP w. Thor upgrade panels

[ABNTROOP]

Looking to sell my OEM UCP with the Thor upgrade panels to help offset the cost of swapping to KMW's new UCP. Just finished washing the dirt off them, grinding down the little bit of surface rust and coating them in a self etching rust oleum rust inhibiting primer. You can top coat as you see fit.
$450 shipped. They haven't taken but a couple hits since I installed them so they have A few scratches and a few dents. One panel got bent up to almost touching one of the OEM bars, but I pounded it back pretty flat. Just landed funny, but otherwise in good shape. They'll get another coat or two of primer before the end of the day.

pm me if interested. Thanks!

 

[Renagade132]

I wish they were for an H2! lol... Gotta get KMW Scarsman to make me a killer UCP set up for my rig

 

[Zach]

I wish they were for an H2! lol... Gotta get KMW Scarsman to make me a killer UCP set up for my rig

It's in the works for the 2. Already hit him up about it. My rubberduck is bent to hell and from day one had a problem with clearance on the cat pipes. It's served its purpose but would like something I don't have to shim the crap out of

 

[ABNTROOP]

Bump, price drop to $400 shipped

 

[derian06]

Man I would jump on this if I wasn't saving up for a winch. Good luck on the sale.

 

[twinmill28]

Love the description, "just a few scratches and a few dents". That's called character and you should charge extra for it! But being the good guy you are, character is included free with every purchase!

 

[twinmill28]

I'm serious, I'm at a point in my life where I'd prefer to buy something with a cool story over something new with no stories

BTW--bump, somebody needs buy this lightly used, still newish but with a cool story UCP!

 

[Zach]

I'm serious, I'm at a point in my life where I'd prefer to buy something with a cool story over something new with no stories

BTW--bump, somebody needs buy this lightly used, still newish but with a cool story UCP!

Might have a complete rubberduck UCP setup for sale in the near future with a ton of character and stories. Hell, you are very familiar with the front section[emoji41]

 

[ABNTROOP]

Bump, $400 shipped

 

[twinmill28]

Might have a complete rubberduck UCP setup for sale in the near future with a ton of character and stories. Hell, you are very familiar with the front section[emoji41]

I'm thinking that Rubber Duck might be ready to be retired; that particular UCP would have better stories hanging on a wall and drinking a beer while talking about it!

 

[Zach]

I'm thinking that Rubber Duck might be ready to be retired; that particular UCP would have better stories hanging on a wall and drinking a beer while talking about it!

Way too many stories behind it and saved a lot of parts. Especially the t case. I have huge gouges on the solid section that covers it.

 

[twinmill28]

Yep, I'd be good with hanging that character on the wall---it's earned it's place of honor, it would be a disgrace to drop in a dumpster when retirement time comes. I've still got my first snapped tie rod from the H3 and my daughter still readily brings out one of the ball bearings from the half-shaft on that incident.

These are metal soldiers who have sacrificed themselves honorably.......

 

[Zach]

My biggest destruction is way to big to hang on a wall. Let the scrap guy take it. Kinda hard to put a rear diff on a wall [emoji41]

 

[ABNTROOP]

Bump! Buy my ****!

 

[ABNTROOP]

$360 shipped in the lower 49 but you PayPal as gift so I don't get hit w. Fees

 

[ABNTROOP]

Bump

 

[ABNTROOP]

The OEM tubing is stil square and straight. Only one dent needed to be pounded out, and that was on the Thor plate where it was curved up a bit. Didn't even curve up enough to come close to touching the OEM tubing cross bar. So again, when I say this set was lightly used, it's been lightly used. In the meantime, at this price, it's proportionate for an OEM UCP which aren't exactly readily available these days, and you're basically getting the Thor upgrade panels for free already welded on. Plus I'm paying the shipping,.

 

[3Hummers]

Guys I know you are talking about an old set of H2 UCP but you are polluting Matt's thread here. Let's keep his WTS thread clean.

 

[SedonaBound]

Anyone got a reference that shows these will bolt on to a H3T?

 

[ABNTROOP]

It'll fit as long as you have the tab coming off the rear of the front crossmember and are not running a rancho lift.

 

[SedonaBound]

Is that the single tab that already secures the rgt rear front skid plate bolt and protrudes to the rear on the right of the cross member?

 

[ABNTROOP]

Yeppers

 

[SedonaBound]

Fasteners included?

 

[ABNTROOP]

No, but you can get replacements here 25 Hex Head Sems Body Bolts M8-1.25 X 42mm Phosphate https://www.amazon.com/dp/B0040CYVV8/ref=cm_sw_r_awd_Dpquvb16W7E5P

 

[ABNTROOP]

Frankly mine were getting a bit chewed up anyway from pulling them off for oil swaps, etc so you are better off getting new hardware.