• Welcome to H4O! For a reduced ad experience, please login or register with the forum.

Hummer H3 - Replacement Rear Frame Shackle Mount

jphh20

Well-Known Member
Messages
173
Location
CT
I am looking to cut off and weld on a new frame rear shackle mount. I have found this one online and curious if anyone knows which would be a best fit to replace the factory frame mount.

I was thinking of the 3" wide x 1/2" ID. Would this fit?

Appreciate any help that you can offer.

https://www.ruffstuffspecialties.com/R1253.html
1683654461198.png
 

jimmy p

Well-Known Member
Messages
186
Location
detroit

jphh20

Well-Known Member
Messages
173
Location
CT
I just did the same thing but made my own frame side mounts. Here are the bushing and tubes I used for reference and used the stock h3 leaf springs with them.

Thank you for your response. I found a place that will cut off my old mounts and install these.
 

Alan45

Probationary Member
Messages
1
Location
Findlay ohio
I just did the same thing but made my own frame side mounts. Here are the bushing and tubes I used for reference and used the stock h3 leaf springs with them.

My mounts are terrible can you direct me to new ones for the rear rusted badly
 

Attachments

  • IMG_0368.jpeg
    IMG_0368.jpeg
    1.3 MB · Views: 89

Jeepwalker

Well-Known Member
Messages
928
Location
WI
Wow..you're right. Those are terrible. You'll probably have more metal work to do once you get the old ones cut off. I'm sure you can modify new or fab-up shackles once you get into it. Love to see the finished product.
 

Korby7

Well-Known Member
Messages
415
Location
Utah
Eventually I'll be swapping out for the ones in this link.

 

e0308jr

Active Member
Messages
42
Location
Muskegon, MI
I have one of the brackets on the other end of the rear leaf spring. I can not find a replacement.
Thanks
 

Attachments

  • thumbnail.jpeg
    thumbnail.jpeg
    123.8 KB · Views: 54
Top