Welcome to the H4O - HUMMER 4x4 Off Road.
Results 1 to 9 of 9
  1. #1
    Bald Tire
    Join Date
    Jan 2018
    Location
    Arizona
    Posts
    27
    Thanks
    6
    Thanked 1 Time in 1 Post

    H3 Exhaust Manifold

    The title many of you would love to ignore (from research)

    Anyways, at startup the truck sounds like a diesel. At operating temperatures, you can hear the ticking on the passenger side front during acceleration (ruled out anything drivetrain). Im assuming a bolt sheared off or I have a crack in the manifold. I will be taking the heat shield off soon to see if my assumptions hold true. Plan on replacing it with a Dorman part# 674-989, mainly because it has a lifetime warranty along with getting it discounted for under 400$ through Autozone.

    What are your guys' experiences? Im willing to take it to a shop since i know its a pretty big job, especially if a bold sheared, and also because she's my daily driver.

  2. #2
    Low Profile
    Join Date
    Nov 2015
    Location
    Suffolk County, New York
    Posts
    122
    Thanks
    31
    Thanked 36 Times in 25 Posts
    You should be able to see if the bolts are gone, especially in the front. You will need an 02 sensor removal tool also which is not expensive. Try to tweak the bolt heads to see if they are cracked inside the head. If one of your front bolts are bad, there is a good chance that the rear is also bad but not always the case. If the front bolts need replacement, is not too bad.
    Two years ago, I purchased my exhaust manifold on ebay. It was $276 shipped. I also purchased better bolts even though the manifold came with replacement bolts.
    Soak the bolts with penetrating oil the night before, even if you take it to a shop to have it done.

    Here is the seller's current listing. Perfect fit and two years later, no issues.
    https://www.ebay.com/itm/Catalytic-C....c100005.m1851
    Last edited by Paranormal; 10-07-2018 at 12:42 PM.
    Support Autism
    2002 Black HMCS
    2006 Blue H3

  3. #3
    Mud Terrain
    Join Date
    Sep 2011
    Location
    United States
    Posts
    954
    Thanks
    1
    Thanked 185 Times in 129 Posts
    Avoid Doorman. I'm not a Doorman fan period. Specific to exhaust manifold, I bough one for the Jeep since it's a beater toy anyway. It was crap. Holes were not drilled correctly. Was noticably less stout than the Jeep part it replaced. On the H3, replacement is a job. You don't want to do it any more than necessary. Get the GM part.

    Sent from my HTC U11 using Tapatalk

  4. #4
    Street Tire
    Join Date
    Mar 2015
    Location
    Oakland Co. Mi.
    Posts
    470
    Thanks
    84
    Thanked 83 Times in 74 Posts
    The gm part cost more, but look how long the one you're replacing lasted .The same with ball joint control arms and wheel bearings. I have 150000 miles on my H3 and all ball joints and control arms ar original.

  5. #5
    Bald Tire
    Join Date
    Jan 2018
    Location
    Arizona
    Posts
    27
    Thanks
    6
    Thanked 1 Time in 1 Post
    Thanks all for the suggestions. Here is a video I took this morning. Cold startup https://youtu.be/z0AZPUCeq0o

    To my knowledge, this manifold is the original and I currently have 160,000 miles on the h3. The car ran in the family. However I know that warranty work was done for the head issue, but I donít know know if the manifold was replaced at that time.

    Defiantly steering clear of dorman now, considering doing what whatwoodwardsh3 said and just replacing with the original but Iíll have to see on the price tag and how much I can get it for. The eBay listing is very tempting as well, especially with no issues.

    If the bolts are sheared should I just take it to a shop to take care of it? Never had to remove a sheared bolt before.

  6. #6
    Bald Tire
    Join Date
    Jan 2018
    Location
    Arizona
    Posts
    27
    Thanks
    6
    Thanked 1 Time in 1 Post
    Do you recall the part# or the brand of bolts you went with?

  7. #7
    Bald Tire
    Join Date
    Jan 2018
    Location
    Arizona
    Posts
    27
    Thanks
    6
    Thanked 1 Time in 1 Post
    Quote Originally Posted by Paranormal View Post
    I also purchased better bolts even though the manifold came with replacement bolts.

    Do you recall the part# or the brand of bolts you went with?

  8. #8
    Low Profile
    Join Date
    Nov 2015
    Location
    Suffolk County, New York
    Posts
    122
    Thanks
    31
    Thanked 36 Times in 25 Posts
    Quote Originally Posted by EndeavoredH3 View Post
    Do you recall the part# or the brand of bolts you went with?
    9 Piece M8 x 1.25mm x 45mm High Tensile Alloy Steel Exhaust Manifold Stud Kit. Search On Ebay
    Support Autism
    2002 Black HMCS
    2006 Blue H3

  9. #9
    Bald Tire
    Join Date
    Apr 2017
    Location
    Bennington, OK
    Posts
    3
    Thanks
    0
    Thanked 1 Time in 1 Post
    I have a 08, with the 3.7 I bought from my bank as a repo last year. While deer hunting last winter I developed an exhaust leak. It gradually got louder. My son in law, Jody & I tore it down last weekend. The base of the air injection check valve was broken and had a sizable exhaust leak. We pulled the exhaust manifold and 4 of the 9 bolts were broken. 3 were extended or flush so we welded nuts on and removed them. The last one at the rear was broken off inside the hole. We drilled it and broke an extractor off, rather than pull the head we bolted on the manifold with new bolts and gaskets. We fabricated a block off plate and eliminated the valve for now. I drove it 80 miles home and didn't get a hint of any exhaust leak. It did loose a lot of powder due to catalytic converter blockage. Tomorrow I will go to the exhaust shop an have the rear one eliminated. The next weekend Jody has off we'll get the front converter and reinstall the air injection check valve that Jody welded up at work. I'll give you an update upon completion. My advice at this point is exhaust leak should be checked out ASAP. The manifold bolts only torque to 15 lbs. That's not much an they are small bolts.

  10. The Following User Says Thank You to Niteowl1 For This Useful Post:

    Korby7 (10-10-2018)

  11. #10
    Bald Tire
    Join Date
    Apr 2017
    Location
    Bennington, OK
    Posts
    3
    Thanks
    0
    Thanked 1 Time in 1 Post
    I have a 08, with the 3.7 I bought from my bank as a repo last year. While deer hunting last winter I developed an exhaust leak. It gradually got louder. My son in law, Jody & I tore it down last weekend. The base of the air injection check valve was broken and had a sizable exhaust leak. We pulled the exhaust manifold and 4 of the 9 bolts were broken. 3 were extended or flush so we welded nuts on and removed them. The last one at the rear was broken off inside the hole. We drilled it and broke an extractor off, rather than pull the head we bolted on the manifold with new bolts and gaskets. We fabricated a block off plate and eliminated the valve for now. I drove it 80 miles home and didn't get a hint of any exhaust leak. It did loose a lot of powder due to catalytic converter blockage. Tomorrow I will go to the exhaust shop an have the rear one eliminated. The next weekend Jody has off we'll get the front converter and reinstall the air injection check valve that Jody welded up at work. I'll give you an update upon completion. My advice at this point is exhaust leak should be checked out ASAP. The manifold bolts only torque to 15 lbs. That's not much an they are small bolts.


 

Similar Threads

  1. H3 Exhaust manifold
    By ludevick in forum HUMMER H3 2006-2010; H3T 2009-2010
    Replies: 7
    Last Post: 08-17-2018, 02:01 PM
  2. Bosal exhaust manifold
    By Sowedk in forum HUMMER H3 2006-2010; H3T 2009-2010
    Replies: 7
    Last Post: 07-01-2018, 09:31 PM
  3. H3 3.5 and 3.7lt header/exhaust manifold
    By stangster in forum HUMMER H3 2006-2010; H3T 2009-2010
    Replies: 24
    Last Post: 08-18-2014, 05:15 AM
  4. Need exhaust manifold, which??
    By AlaskaDan in forum HUMMER H3 2006-2010; H3T 2009-2010
    Replies: 20
    Last Post: 09-11-2013, 06:55 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Logout