2010H3TAlpha
Well-Known Member
- Messages
- 563
- Location
- Issaquah, WA
Here is the build list. Prices are MSRP as Sonnax has very strict MAP pricing on their parts, especially performance stuff:
https://wardswildlife-my.sharepoint...lGlvz7c2SLUYYBYs9H_Q4vUWnVFPUwzpC5Ag?e=nLsf5z
Here's a screen shot of the build doc. This does not include labor which will obviously vary in every area. It wasn't cheap, but should give me similar performance to a PATC Level 5 Raptor for $2k less installed and 6x longer warranty with less stipulations:
Note that the Low Reverse Sprag and Housing are not required; those are the parts that failed in mine (center collar cracked in two, my builder said it was the first one he'd ever seen do that. Most reverse sprag failures are due to holding 1st gear in 4low under heavy load for extended periods of time, aka hill climbs and crawling ).
https://wardswildlife-my.sharepoint...lGlvz7c2SLUYYBYs9H_Q4vUWnVFPUwzpC5Ag?e=nLsf5z
Here's a screen shot of the build doc. This does not include labor which will obviously vary in every area. It wasn't cheap, but should give me similar performance to a PATC Level 5 Raptor for $2k less installed and 6x longer warranty with less stipulations:
Note that the Low Reverse Sprag and Housing are not required; those are the parts that failed in mine (center collar cracked in two, my builder said it was the first one he'd ever seen do that. Most reverse sprag failures are due to holding 1st gear in 4low under heavy load for extended periods of time, aka hill climbs and crawling ).
Last edited: