Wanted to update you guys on what has been going on.
Again, I apologize for my mistake.
Yes, there is welded leaf spring bolt plates out there that I'm calling version 2. I had completely forgotten about that change because I didn't exactly make the change, I just verbally approved it.
Below is Version 3, it will be bent like the original design so that it cannot have the same failure. It also has some minor changes to improve the ease of installation. To make it easier to manufacture, the shock mount is 1/4" lower.
While this decision this isn't final, currently the thought is that there was no penetration resulting in a poor weld which caused failure. Again this isn't final, but this is currently the only reported incident so far.
I plan to replace his High Clearance Leaf Spring Bolt Plates free of charge with the new design. Although I would want to know those particular ones are destroyed somehow because shipping them will cost a ton.
I plan to offer everyone $10 off every part they purchase for the next month with the idea to raise awareness and to check their High Clearance Leaf Spring Bolt Plates.
For anyone that ever has any issues with my parts, know that I will do everything I can to take care of you within reason.
Bought the ebay flip key and had it programmed. Works great and looks awesome.
View attachment 23933
View attachment 23934
Sent from my iPhone using Tapatalk
this is my broken plate should be one piece not the case was on the side of the road for hours almost 400 later had a road side weld job was going how do I get a replacement I get no reply
this is my broken plate should be one piece not the case was on the side of the road for hours almost 400 later had a road side weld job was going how do I get a replacement I get no reply View attachment 24012
this is my broken plate should be one piece not the case was on the side of the road for hours almost 400 later had a road side weld job was going how do I get a replacement I get no reply
I'm curious when you purchased yours. I have a set of these also but I may take them off and throw them in the recycle bin.
today i have got parcel from Erick with mounts. so what i see in the box. two mounts.... and nothing more.. no ubolts, no nuts ... mounts painted bad.. no powder paint..
Отправлено с моего SM-N950F через Tapatalk
two mounts.... and nothing more.. no ubolts, no nuts ... mounts painted bad.. no powder paint..
I would never trust anything that was welded like that. Especially considering how far out you range on your trips.
Just check to see if yours is bended or welded. Mine look good. Haven't had a problem yet. I would keep your old spares with you just as a precaution tho.
37 inch tyres ?2009 h3t alpha super charged a few picksView attachment 24001View attachment 24002
Just purchase the CSF-7061 all aluminum radiator for my H3 Alpha through Summit... expensive, but I think it's the best option. I called CSF and they said it was in stock and would ship right away.
Just purchase the CSF-7061 all aluminum radiator for my H3 Alpha through Summit... expensive, but I think it's the best option. I called CSF and they said it was in stock and would ship right away.