It's time, we have been planning for over a year now. Here is the drawing of the new kitchen, since all build threads start with a plan.
![]()
It's time, we have been planning for over a year now. Here is the drawing of the new kitchen, since all build threads start with a plan.
![]()
It's not a mod 'til the Sawzall comes out
Thanks to:
Jeff Hayer of Motorsports Fabrication
Tommy @ Polyperformance
Dan and Brian @ Ruffstuff Specialties
Jesse @ High Angle Driveline
Kevin @ Parts Mike
Bob Thilman @ 4Wheel Parts
and to The Man - Speedy
We are partially re-doing our kitchen now. New granite countertops, new sink, faucet, cooktop, light fixtures.. Re-doing the half bathroom also. Just poured 9000 sf more driveway to connect all of the shops and barn.
1998 H1 Open Top
1994 H1 HMC4
1992 H1 HMC4 LE
1990 1025 Armament Carrier
KJ6JCC
BlackSheep Hummer Squadron, H1 PsychoSquad
bebe (01-11-2021)
It's not a mod 'til the Sawzall comes out
Thanks to:
Jeff Hayer of Motorsports Fabrication
Tommy @ Polyperformance
Dan and Brian @ Ruffstuff Specialties
Jesse @ High Angle Driveline
Kevin @ Parts Mike
Bob Thilman @ 4Wheel Parts
and to The Man - Speedy
The Fridge will be moved to the left side with a pantry and a desk. Where the fridge is now will be a convection microwave and a new gas wall oven. This will give us a lot more pantry space. The two cabinets on either side of the stove are 48" glass door cabinets.
The island will be getting a new sink and faucets and a trash compactor on the left and a dishwasher on the right.
We are using the same dishwasher, Fridge and stove since we just purchased them 3 years ago when we moved in. Here are the samples of the granite for the back wall countertops, the cabinets and the butcher block top on the island. Flooring is also new so it's staying the same.
![]()
Last edited by bebe; 01-11-2021 at 04:41 PM.
It's not a mod 'til the Sawzall comes out
Thanks to:
Jeff Hayer of Motorsports Fabrication
Tommy @ Polyperformance
Dan and Brian @ Ruffstuff Specialties
Jesse @ High Angle Driveline
Kevin @ Parts Mike
Bob Thilman @ 4Wheel Parts
and to The Man - Speedy
It's not a mod 'til the Sawzall comes out
Thanks to:
Jeff Hayer of Motorsports Fabrication
Tommy @ Polyperformance
Dan and Brian @ Ruffstuff Specialties
Jesse @ High Angle Driveline
Kevin @ Parts Mike
Bob Thilman @ 4Wheel Parts
and to The Man - Speedy
Here is the inspiration photo on the butcher block island top (Brazilian Cherry/Jatoba) and the sink, a black gloss farmhouse fire clay. The new Faucet is antique brass and we will also have a antique brass pot filler above the stove![]()
Sorry for the huge photos lol I'll resize them in photo bucket as soon as I figure it out
![]()
It's not a mod 'til the Sawzall comes out
Thanks to:
Jeff Hayer of Motorsports Fabrication
Tommy @ Polyperformance
Dan and Brian @ Ruffstuff Specialties
Jesse @ High Angle Driveline
Kevin @ Parts Mike
Bob Thilman @ 4Wheel Parts
and to The Man - Speedy
3Hummers (01-12-2021)
Them tacos will taste even better next time in a new kitchen!
bebe (01-12-2021)
Good luck on the reno!
I just finished our kitchen - well there is one thing left to hook up, the hood vent, but that is a one beer job for this weekend!!
2009 Hummer H3T Alpha
bebe (01-12-2021)
Looks really nice. Well done.
1998 H1 Open Top
1994 H1 HMC4
1992 H1 HMC4 LE
1990 1025 Armament Carrier
KJ6JCC
BlackSheep Hummer Squadron, H1 PsychoSquad
bebe (01-12-2021)
The floor plan looks nice. I can't wait to see how it will turn out. Make sure to keep us posted with the progress.
I think ours is done now but waiting for the final thumbs up from JJ.
1998 H1 Open Top
1994 H1 HMC4
1992 H1 HMC4 LE
1990 1025 Armament Carrier
KJ6JCC
BlackSheep Hummer Squadron, H1 PsychoSquad
bebe (01-20-2021)
Good luck on the re-do.
It will be well worth the headaches in the end.
(and trust me, there will be headaches) ...
Finally, finishing up the reno on my place out in the sticks (Way past time to move out of Dallas).
Prepping for a Feb move-in.
It will be close.
Ready or not, the moving trucks will be rolling.
The kitchen was the worst, but it is coming together nicely and is 95% done.
Hardwoods and tile were the easiest/smoothest thing, believe it or not.
Down to painting and the detail work now.
2010 H3 Adventure
Pro Comp 6079 Alloys (17x9), 1079 Beadlock Rings, 12.50 X 35 Good Year MTR's W/K
Leveled, Rock Rails/U-Steps, SMA Brush Guard, KC Slim Lites, SG II, Rad-1, Magellan 1700 GPS, Midland Comm
Pics!!!
It's not a mod 'til the Sawzall comes out
Thanks to:
Jeff Hayer of Motorsports Fabrication
Tommy @ Polyperformance
Dan and Brian @ Ruffstuff Specialties
Jesse @ High Angle Driveline
Kevin @ Parts Mike
Bob Thilman @ 4Wheel Parts
and to The Man - Speedy
Last edited by Gunner_45; 01-27-2021 at 10:59 PM.
2010 H3 Adventure
Pro Comp 6079 Alloys (17x9), 1079 Beadlock Rings, 12.50 X 35 Good Year MTR's W/K
Leveled, Rock Rails/U-Steps, SMA Brush Guard, KC Slim Lites, SG II, Rad-1, Magellan 1700 GPS, Midland Comm
bebe (02-03-2021)
I hope it's not to everyone's liking because that would be BORING! That said, I like it.
Gunner_45 (01-28-2021)
Bookmarks