• Welcome to H4O! For a reduced ad experience, please login or register with the forum.

Need help with bore size for wheels

D

denlion

Member
Messages
23
Location
Ontario
Hi guys,

Was looking through the internet and finally found combination I liked a lot

[FONT=&amp]1: XD Series ADDICT Matte Black - for wheels

2: 35x12.5 r17 BFGoodrich All Terrain T/A KO2

[/FONT]Found a web site where I could order those wheels, but kinda got confused.

Regarding the info I have found on bolt pattern:

Wheel Bore: 101.6mm
Bolt Pattern: 6x5.5" / 6x139.7mm

But for those XD Addict I can see only:

[FONT=&amp]XD79879068712N / 17 / 9 / 6x139.7 / -12 / 106.25 [/FONT]
[FONT=&amp]XD79879068718[/FONT][FONT=&amp] / 17 / 9 / 6x139.7 / 18 / 106.25

Where the last two numbers are offset and bore size. So, I have a couple of questions:

A: What offset would work better? I guess I need -12 if I want tires to be little bit wider that the standard? Will it fit the stock H3? Does someone has an exp with that?

B: Looks like bore size is bigger, what does it mean? Will they fit stock H3 at all?

Thanks to everyone who will be able to help... It is really confusing to match all that info together.

PS: Actually that configuration I saw on some other H3 forum and like how it looks like. As far as I understood guy were saying there is no issues with such combination, but again, how it is possible with that difference in bore size?
[/FONT]
 
Last edited:
Traxx

Traxx

Well-Known Member
Messages
682
Location
PNW
Bore size is fine, wheels with -12 offset will stick out several inches from the fender, They will also sling rocks and crap all over the side of the vehicle, mine certainly do.. I had to get the fender flares to avoid being ticketed and linexed the rear fenders since they were getting chewed up by rock hits.
 
falcon

falcon

Member
Messages
12
Location
Riyadh, KSA
denlion said:
Hi guys,

Was looking through the internet and finally found combination I liked a lot

[FONT=&amp]1: XD Series ADDICT Matte Black - for wheels

2: 35x12.5 r17 BFGoodrich All Terrain T/A KO2

[/FONT]Found a web site where I could order those wheels, but kinda got confused.

Regarding the info I have found on bolt pattern:

Wheel Bore: 101.6mm
Bolt Pattern: 6x5.5" / 6x139.7mm

But for those XD Addict I can see only:

[FONT=&amp]XD79879068712N / 17 / 9 / 6x139.7 / -12 / 106.25 [/FONT]
[FONT=&amp]XD79879068718[/FONT][FONT=&amp] / 17 / 9 / 6x139.7 / 18 / 106.25

Where the last two numbers are offset and bore size. So, I have a couple of questions:

A: What offset would work better? I guess I need -12 if I want tires to be little bit wider that the standard? Will it fit the stock H3? Does someone has an exp with that?

B: Looks like bore size is bigger, what does it mean? Will they fit stock H3 at all?

Thanks to everyone who will be able to help... It is really confusing to match all that info together.

PS: Actually that configuration I saw on some other H3 forum and like how it looks like. As far as I understood guy were saying there is no issues with such combination, but again, how it is possible with that difference in bore size?
[/FONT]
Click to expand...


I purchased both exact wheels (XD79879068718) and later (XD79879068712N). Reason I had to buy the -12 offset is because the Rancho lift needed 4.5 backspace.

As for the bore size, and in order to fill the gap, I had to buy Hub centric Rings with an inner diameter of 100.6 mm and an outer diameter of 106 mm.
 
falcon

falcon

Member
Messages
12
Location
Riyadh, KSA
denlion said:
Hmmm... the other option is 18... which I am not sure about at all...
Click to expand...

here is the 18 (stock before installing the lift) :
481104_4453789868825_270659450_n.jpg
 
Last edited:
amrg

amrg

Well-Known Member
Messages
2,317
Location
Qatar
I ran +10 offset with 35s and the front tires rubbed on the back of the fender (i have stock fender flares).

Stock offset is +38 so if ur keeping the same size tires -12 will move outward 50 mm ( 2") over original location.

Sent from my SM-G960F using Tapatalk
 
D

denlion

Member
Messages
23
Location
Ontario
amrg said:
I ran +10 offset with 35s and the front tires rubbed on the back of the fender (i have stock fender flares).

Stock offset is +38 so if ur keeping the same size tires -12 will move outward 50 mm ( 2") over original location.

Sent from my SM-G960F using Tapatalk
Click to expand...

So, I guess I will be better with +18 offset then... Thanks!
 
amrg

amrg

Well-Known Member
Messages
2,317
Location
Qatar
Ya that will move your tires 20 mn outwards.

Sent from my SM-G960F using Tapatalk
 
You must log in or register to reply here.
Top