Transfer Case

In theory the Colorado have the same engine right? couldnt you bolt up there TC and be able to have RWD? might be a stupid question but i rather know the answer

No, they're not even close. I blew up my transfer case in my Adventure pkg, I bought a Colorado transfer case (hoping it'd work, but mostly for its 6 speed transmission)

I'll see if I can get up into my storage loft and take a picture of both.

Sneakysilver said:

In theory the Colorado have the same engine right? couldnt you bolt up there TC and be able to have RWD? might be a stupid question but i rather know the answer

Click to expand...

I'll give you 10 points for the thought, I'll ask around the 355 boys and see what they think.

OK getting a lot of great feed back and need to know a few things, does the 355 CV splines matches our diff? It seems that if the TC gets replace the front axle tube needs to be changed out. They have an actuator which I assume locks the hubs so the front end is closed in 4X4 mode and the open in 2X4.


Here's the page if you want to follow along.

http://www.355nation.net/forum/i4-i5-engine-drivetrain/72809-355-transfer-case.html#post2197169

Very cool!

Seems like a good group of guys over there helpin ya out!


Sent from my iPad using Tapatalk HD

any update on this