• Welcome to H4O! For a reduced ad experience, please login or register with the forum.

G2 Light Bar Questions

F

Freddy

Guest

Attachments

  • 11174918_812642002159213_6051518952959137627_n.jpg
    11174918_812642002159213_6051518952959137627_n.jpg
    172.2 KB · Views: 4,962
Last edited by a moderator:
derian06

derian06

Red Rockett
Messages
1,866
Location
Madison, AL
I have 2 amazon bars that work perfectly and weren't expensive at all. Mounts are great, can easily handle two bars. You can use riv nuts, or self tapping screws, I used self tapping screws.
65d3e8034f34d3f0a6a0f91fc4f27ad7.jpg
 
razortray

razortray

Well-Known Member
Messages
91
Location
Arkansas
dd239a617a5a45a491e1e8864641bb62.jpg

I ordered the g2 brackets for $100
eBay 50" curved light bar $99
Oreilys switch $5

The 50" straight led bar I have mounted in these pictures I purchased from eBay also for $89. I also used self tapping screws. I searched every where my g2 brackets where all I could find. I believe there was a guy on the forum making them but you had to have them powered coated and drill your on holes in them not sure on what he charges I would assume much cheaper than $100


Sent from my iPhone using Tapatalk
 
razortray

razortray

Well-Known Member
Messages
91
Location
Arkansas
derian06 said:
I have 2 amazon bars that work perfectly and weren't expensive at all. Mounts are great, can easily handle two bars. You can use riv nuts, or self tapping screws, I used self tapping screws.
65d3e8034f34d3f0a6a0f91fc4f27ad7.jpg
Click to expand...

What did you use to add two light bars? Two curved bars would look great imo. I am also thinking about adding led pods on my intake covers just not sure how they are going to hold up.


Sent from my iPhone using Tapatalk
 
H3HummerLineX

H3HummerLineX

Well-Known Member
Messages
357
Location
SoCal, Chatsworth
Moving to the 50" curved bar soon. Removing the rack and mounting the Hi Lift to the top roof rack rails. I'm thinking of mounting a pair of single row 12" lights on each side of the spare tire under the rear door as I have a 2" gap to fill.


Sent from my iPhone using Tapatalk
1c49c143f07934a3a95bee24c866000b.jpg
3149fb54aec950227f4b4d6175c5bccc.jpg
 
Last edited:
razortray

razortray

Well-Known Member
Messages
91
Location
Arkansas
H3HummerLineX said:
Moving to the 50" curved bar soon. Removing the rack and mounting the Hi Lift to the top roof rack rails. I'm thinking of mounting a pair of single row 12" lights on each side of the spare tire under the rear door as I have a 2" gap to fill.


Sent from my iPhone using Tapatalk
1c49c143f07934a3a95bee24c866000b.jpg
3149fb54aec950227f4b4d6175c5bccc.jpg
Click to expand...


The two 12" bars would look great IMO! How did you mount your pod lights? I order 4 all white 2x2 plan to double them up on each side similar to yours. Yours looks great btw. I think Iam also ready for a roof rack of some sort. I picked up a couple bags of mulch and two 5 gal jugs of gas by the 10 minute drive home my h3 smelt horrible. Would really like to be able to just throw that stuff on top.


Sent from my iPhone using Tapatalk
 
amrg

amrg

Well-Known Member
Messages
2,317
Location
Qatar
A spot bar concentrates alot of light of a small side to side distance. Useful for long range (led scatters alot of light around so you get little lightig everywhere else).
My 40" light bar probably has a 15 meters across hot spot at roughly 300 meters away
 
S

scoreh3

Well-Known Member
Messages
1,024
Location
SoCal
H3hummerlinex how did you mount your little cube lights ? Did you just mount them to the fake air caps or did you make mounts ?
 
razortray

razortray

Well-Known Member
Messages
91
Location
Arkansas
7afe3e70a003d3c72f22d3bcf08c3301.jpg

Started with a 50" straight installed a 50 curved today same specs the curved definitely covers more and looks better IMO


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Top